ProbitLab2

The ProbitLab2, as successor of the ProbitLab, is a platform for testing of IEC62386 Edition1 & Edition2 control gears, control devices and bus power supplies to improve the interoperability.

The ProbitLab2 together with the ProbitBench enables to run the IEC62386 normative test sequences distributed by the DIIA.

All together they are the authorized test equipment for product approval and registration in order to bear the logo of the DIIA.

▸ Details

Key facts

·     Signal generator
Adjustable high and low voltage
Adjustable rise and fall times
Adjustable current limiter
·     Connectivity
For external oscilloscope and ampere meter
Switchable AC and DC DUT supply input
4 high capacity switching relay outputs
4 digital outputs
2 digital inputs
2 analog inputs
·     Product certification
Running the IEC62386 Edition1 & Edition2 test procedures
·     ProbitBench software
Selection and control of test procedures
Send individual commands
Sniffer for analyzing telegrams
BitScope for analyzing the bus signal timing
·     19" rack mount design
For integration in existing laboratary equipment

Technical specification

·     Supply voltage 85V to 230V (5A medium delay fuse protection)
·     AC DUT supply input up to 277VAC/4A
DC DUT supply input up to 30VDC/4A
·     Double circuit breaker for DUT supply input voltage protection (C4 characteristic)
·     High capacity switching relay output up to 277VAC/10A or 30VDC/10A
·     Digital output is 5VDC and up to 20mA
·     Input range of the digital inputs is 5V - 230VAC/VDC
(Minimum 5mA input source required)
·     Input range of analog inputs is -10V to +10V
(Input resistance 115kOhm)
·     Size approx. 483mm x 132mm x 252mm
·     Weight approx. 7.1kg

▸ Downloads


 ProbitLab2 V4.12.zip


2021-09-22

Description

·     ProbitLab2 firmware
·     It is recommended to use the latest Probit driver


New changes

·     For ProbitBench V4.3.0.0 and higher
·     Revised communication protocol for future needs


››   Previous changes



 Probit Calibrator Tool V4.3.zip


2019-11-16

Description

·     Calibration tool for ProbitLab2
·     For ProbitLab V4.10 and higher
·     To calibrate the analog voltage measurement of the DALI input and the DALI input receiver thresholds.
·     Note: Please follow the instructions of the tool very closely.
It is recommended to calibrate the ProbitLab2 device after upgrading to 4.10 only once.
Please make sure the ProbitLab2 device is warmed up before calibration.
We recommend to let operate the device under normal conditions for ca. 1 hour before.



 Probit Driver Package 2.12.36.4 WHQL.zip


2021-08-30

Description

·     Probit hardware driver
·     WHQL certified
·     Note: Previous non-WHQL drivers have no signature so that on some Windows OS versions (e.g. 64-bit versions) you need to install them in a special mode. Follow these instructions.


New changes

·     WHQL certified
·     ProbitDongle device added


››   Previous changes



 ProbitLab2 - Getting Started.pdf


2017-05-10

Description

·     How to get started with ProbitLab2



 ProbitLab2 - Example.pdf


2017-05-10

Description

·     Example of DUT connection to ProbitLab2


▸ FAQ



Why the ProbitLab2 is not running?

·     Answer: Please make sure the main supply is connected correctly to the ProbitLab2 and the main supply switch at the back side is on.
·     Answer: Please make sure the emergency button is not pressed.






Why I cannot measure a voltage at the DALI terminals?

·     Answer: After power up of the ProbitLab2 the DALI terminals are disabled. After connecting with the ProbitBench software you are able to activate the integrated DALI bus power supply.